After getting Ham Radio Deluxe, DM780 and the Pain in my back side logbook to play nice with each other and myself. I’ve been doing some digital. I got some new places I’ve never talked to and had a blast.
New places I got to talk to were
MJ0SIT – Steve – Jersey (No, not New Jersey!)
I actually had to google Jersey for its info
EW6FW - Sergej – Belarus
According to PSK Reporter, My signal got around as well
I’ve also notice a hetrodyne that gets louder as I go up in frequency. I hope to see if it still exists when I bring the setup to Field Day
You can see sort of what I am talking about in the screen shot above.
Since I got the SignaLink I figured I can mess around with the Rigblaster. I wanted to adapt it to the FT-100 so If I ever go out with it and a laptop, I can do some digital work using the rigblaster as a interface.
On their website they posted a article “Connecting your FT-897 to The Rigblaster NOMIC for digital operation” (Written By Jeff, K8YSV).
Just some things I would like to point out. The FT-817, FT-857D, FT-897, FT-100D, FT-950, FT-2000 and I am sure many other makes and models use the MINI 6 PIN DIN connector which is the same as a PS2 cable that you find on a semi older keyboards and mouses (mice). I thought it would be easy and just find a old mouse or keyboard, clip the wire and use the connector. Well guess what? The PS2 Mouse and keyboard use 4 out of the 6 pins and the two that have nothing connected to them are need to wire up for the Yaesu rigs. You just might be lucky and come across a cable that works. I went through about a dozen keyboards and mouses until I gave up. Getting frustrated I went on Ebay and picked up a 6 pack of connectors for $10 w/ shipping.
If you follow the entire article on the above link you can make a cable with just basic soldering skills. I added a ferrite choke to the data and audio cables to help cut down on the noise generated from nearby objects.
After constructing the cable and testing it out, I wasn’t too impressed on it’s performance compared to hooking the NOMIC up using the Microphone jack and audio patch cables.
I notice it didn’t sound right. I don’t have the proper analyzing equipment to give a detailed reason why but if you look at the band edges on the above picture, you will notice a drop off which I never seen with the unit normally hooked up. I also notice that the audio is not as strong either. I had to max out all the settings on my soundcard and radio. Even with the levels maxed and removing the resistor on the NOMIC board, the audio still seemed low.
Overall I am not too thrilled about the outcome of the cable but it works. It makes it possible to use the microphone again and It’s going to help on a future project I have in the works.
Since my recent purchase I’ve been back into digital. In the past couple of say 20M in the afternoon has been really good to me
I made contact with the following
RK9AN – Anvar -Asiatic Russia
RN3AJK – Artem – Euro Russia
DK9WB – Jakob – Germany
CT2FPY – Leonel – Portugal
M0NPQ – Nerijus – England
DL5MGH – Armin – Germany
IW3SGT – Alessandro – Italy
IZ3LEF – Emiliano – Italy
IW6NBX – Antonio – Italy
SP5GRU – Wlodek – Poland
EA3BJW – Joan – Spain
US5CCO – Vlad – Ukraine
UA3ON – Antoly – Euro Russia
RD3WW – Vladimir – Euro Russia
IN3NHZ – Roberto – Italy
KE5AQD – Roger – USA
W3CRR – Craig – USA
9A4A – Zlatko – Croatia
I have been noticing lately that after sending CQ and acknowledging someone that people are still trying to contact me. I like pileups for me but it’s hard in the digital world. It gets annoying because I’m unable to make out the first half of the conversation because of QRM. I figured like on SSB, once someone acknowledges someone else that everyone else on the frequency remains QRT until the exchange ends??? – END RANT
I also got work K2TPZ on CW. I still have trouble receiving so I cheated and used the computer to receive his CW and used the touch pad to send. I hope by engaging in CW more and more that the dits and dahs will automatically turn into letters and words