I had some time to myself on Saturday (6/14) which is rare so I decided to play a little radio on top of a mountain/hill. I found that when it comes to doing SOTA that ends up being a last minute effort to get my stuff ready. This time I wanted to do a summit that I have never done before. I decided to go to Peaked Mountain located in Hampden/Monson MA.  I notified SOTAwatch and local SOTA/Ham facebook groups that I will be out. I find that letting many people know that you’re going to be activating will increase your chances of a successful activation.

The Hike

Expecting the unknown for both the hike and summit I over packed which is better than not packing that one item you’ll end up needing. The mountain is closer to my QTH then I originally thought which was great. The hike also wasn’t bad. The trails were (now) clearly marked and was able to make it to the summit in 20min or so. My only concern was the rain.

Welded Sign/Box near the summit

The Setup

Due to the overcast I didn’t have much time to really enjoy the view. I wanted to get on the air as fast as possible in case it was going to rain. However I have a new G5RV jr that I home brewed to replace the crappy G5RV that I was using. I also took along the  vertical end fed (EARCHI) as I’ve never used it for SOTA. I wanted to put both up.

Here you can see the G5RV mounted to the Jack Kite 31′ fiberglass pole. I used an eyebolt that is connected to the center insulator and slid it down the mast. I might place some tape at that spot to keep the eyebolt from wearing out the fiberglass tube. Also pictured is the end fed that is attached to the tip of the pole.

Another photo showing my mini G5RV. I made custom insulators using plexiglass that doubles as winders

Here is a photo showing my old G5RV next to my new one.

Here is a shot of the antenna with both antennas attached.
Setup took less than 10Min with most of my time spent untangling wires.

Getting On The Air

After sending out a spot to SOTAwatch and my local SOTA group I was on the air. However no one is coming back. Usually I get people within minutes coming back to my crys of CQ. After about 10min or so, Jim (KK1W) came back to my crys and made my first contact. Other people started to trickle in.  After AJ5C and N4LA I heard a couple DX contacts from Romania and England but was un-able to establish contact

My setup with the KX3, Wouxun for VHF and my 9:1 match for the endfed

I tried switching around bands and antennas to make my contacts. I knew I could make contact with KB1RJC and KB1RJD if I went onto 40M and sure enough they were on and waiting (thank you). They made my 4th and 5th contact.

My Seat with Antenna in the background

After making a couple more local contacts, I called it a day. I have 7 contacts so I can consider the summit to be officially activated. The sun started to come out and the skys started to clear up a bit and was able to enjoy the view from the mountain top

Views from the top of Peaked Mountain.

Overall Experiences 

I’d say this was the hardest HF activation I’ve done to date. It was not the hike because that was very nice and easy. It was hard because I am not sure if it was my antennas, location, band conditions or a combination of all three that was making it difficult for communicating. There were also many hikers up on the mountain and I ended having to explain “what that is” many times over which took me away from the radio. Even though I love explaining what my setup is to non-hams, I just wasn’t in the mood but I didn’t want to come off as rude. I love the location and mountain and this location is now on my list of summits to activate next year.

Thanks for reading,

Jeff – NT1K